Login in above or register to subscribe to this topic.
You can subscribe to receive an email when someone replies to this topic.
We will only send 1 email to you if there has been 1 or more replies since your last viewing. You can unsubscribe again here or in your account settings pages at any time.
Well, first off, your probably going to need to swap out your CPU, Graphics card, and RAM, all of which can be tested at: http://www.systemrequirementslab.com/referrer/srtest
All you have to do is find the game you bought and click "Can You Run It" in the blue box. It'll download a little file and you'll get your system performance. From there, report back to here and we'll finish the disscussion.
It requires a gfroce 5 or above with pixelshader 2.0 support.
I got the info from dxfiag and there nto much more there except its from 2006
S i just need to know how would I get a new grpahics card ( Ive been todl to get gforce 8400 or 8600 ) I just need a price for this and a way to get more ghz without overclocking anything
well if your looking to upgrade and have an older computer you will have to concider the mother board older models can only handle so much again more details if u do upgrade your proseser make sure you get the right socket also it is important to keep a well balanced machine so dont drasticly upgrade one thing with out looking at the other componets again i am being vague because there is not enought information here deadwing is right so i cant really give u alot of details here -sorry
overclocking could be good at times but make sure u dont overclock it to much its like giving a car nitros if u use it your car will be fast but it will not last long so just be carefull also nice details stardust your right about the video card but of coarse you already know that
well once you have the proseser and it is the right socket and such first u have to remove the heatsink which shoulnd be hard (still hard to explain here) and pull up the realese for the proseser when puting the other one in make sure all the pins are strate and be carful the pins can be easily broken off if u want u can also by some of that gray past stuff that goes on the top of the prosseser to keep it cold then put back the heatsink if u want details on something specific just ask those are just basic instructions
Login in above or register to subscribe to this topic.
You can subscribe to receive an email when someone replies to this topic.
We will only send 1 email to you if there has been 1 or more replies since your last viewing. You can unsubscribe again here or in your account settings pages at any time.