Car tuning

hey sweet thx man : )

Kenny 2x4 how do you get the zonda to run that fast I could only get 6.7 using oyur setup. HELP

Oh sorry my bad.
I forgot to say I've changed it quite a lot.
Namely anything assosciated with the front suspension is soft and anything assosciated with the rear suspension is stiff.
The ride height should be heightened to maximum as well.
Then there should be a front pressure bias i.e. the front tyres have maximum pressure and the rears have minimum pressure.

Then put the suspension back to stock.

You also don't need the brakes so you can stock that again.

The Engine now.
Everything to the right.

Gearbox (you only need the 4 gears)
1): + 10
2): + 9
3): + 9
4): + 10
Final drive ratio: + 10

i'm still getting 6.7 to 6.8 cant get any better. any suggestions?

Um...
See with the widebody kit? Cancel putting it to 100% and leave it at 0%.
Make the hood Stock Carbon Fiber.
Spoiler wise...I think I did spoiler 403 and put Zone 3 to 100%.

that did the job thanks.

Do you have a Camaro stup for drag?

On 23-Jul-2008 Mr. Videogamesman said:

Do you have a Camaro stup for drag?

its the very first post in this topic, well that is the basic one and it works quite well so try it

Yeah and not much else really works with the Camaro anyways unless you want to make a Camaro Wheelie set up. In which case just make ride height maximum.

Here is my setup for that great oldie camaro ss @ 5.10

Give it a try

CamaroSS - 755 BHP - Drag

Parts:
Engine- Stage 4
DriveTrain- Stage 4
Forced Induction- Stage 4
Suspension- Stage 4
Brakes- Stage 3
Tires- Stage 4
Nos- Stage 4


Suspension:
Front Shock Compression Rate all the way left
Rear Shock Compression Rate all the way left
Front Shock Rebound Rate all the way left
Rear Shock Rebound Rate all the way left
Front Spring Rate all the way left
Rear Spring Rate all the way left
Ride Height all the way left
Front Roll Bar Stiffness all the way left
Rear Roll Bar Stiffness all the way left
Front Tire Pressure all the way right
Rear Tire Pressure all the way left
Toe stock
Camber stock
Caster stock
Steering Response Ratio stock

Engine:
Cam Timing - all the way left
Start Boost - all the way right
End Boost - all the way right
Nitrous Pressure - all the way right
Nitrous Jetting Flow Rate - all the way right

DriveTrain:
1st stock
2nd stock
3rd stock
4th stock
5th put the dot under the 5
6th +1
Final stock

Brakes:
Whatever, doesnt matter

Body kit is widebody at 0%
Spoiler is 403 zone 1: 0% zone 2: 100% zone 3: 50%
EXTREMELY IMPORTANT:

1. After you do all that put stock suspension on it

2. WHen using this car warm your tires and stuff then put it in 5th before you start then when the girl/tree goes green punch the accel and nos at the same time, you will only need to shift once.

i finally got me a zonda this is my line up
grip: 911 turbo
speed: murcielago and zonda
drag:charget rt
drift:rx7
1 king left and its not ryo i beat ryo my first day gettin the game

shaneyboi-laad: next time please just edit your post as you did in your first one which will be deleted seeing as your second one has a set up in it.
typhlosionwillownu: which king is that then?

I found out that the Supra is a great car for drag.

does anyone have asetup for a RX7 drift with all stage fours? thanks.

On 25-Jul-2008 shaneyboi-laad said:

does anyone have asetup for a RX7 drift with all stage fours? thanks.

this is kenny's blueprint

RX-7 drift that isn't Aki Kimura's settings though close enough:
Modifications: Stage 4 everything apart from the Brakes (but stock the Tyres also after tuning them)
Body:
Spoiler: Genterra 204
Spoiler Zones in order: 75, 50, 100, 35
Hood: leave at stock
Stratos Widebody kit 7: leave all zones as they are
Roll cage if you wish btw. Doesn't really matter.
SUSPENSION (- means to the left of default, + means right of default)
Front Shock Compression: 0
Rear Shock Compression: 0
Front Shock Rebound: 0
Rear Shock Rebound: 0
Front Springs: 0
Rear Springs: 0
Ride Height: -10
Front Anti-Roll Bar: 0
Rear Anti-Roll Bar: 0
Tyre Pressures: both -10
Toe: 0
Camber: 0
Caster: 0
Steering Ratio: 0
ENGINE:
CAM Timing: 0
Start and End Boost to maximum
Nitrous pressure and Jetting flow rate: 0
GearBox ratios:
All 0

Not much to be done basically with the RX-7 really lol.
Albeit I might have to put some changes to it...

On 25-Jul-2008 fish man said:

this is kenny's blueprint

RX-7 drift that isn't Aki Kimura's settings though close enough:
Modifications: Stage 4 everything apart from the Brakes (but stock the Tyres also after tuning them)
Body:
Spoiler: Genterra 204
Spoiler Zones in order: 75, 50, 100, 35
Hood: leave at stock
Stratos Widebody kit 7: leave all zones as they are
Roll cage if you wish btw. Doesn't really matter.
SUSPENSION (- means to the left of default, + means right of default)
Front Shock Compression: 0
Rear Shock Compression: 0
Front Shock Rebound: 0
Rear Shock Rebound: 0
Front Springs: 0
Rear Springs: 0
Ride Height: -10
Front Anti-Roll Bar: 0
Rear Anti-Roll Bar: 0
Tyre Pressures: both -10
Toe: 0
Camber: 0
Caster: 0
Steering Ratio: 0
ENGINE:
CAM Timing: 0
Start and End Boost to maximum
Nitrous pressure and Jetting flow rate: 0
GearBox ratios:
All 0

thanks i willgive it a go. I also need a setup for a F1 for grip with allstage threes.

F1...
I don't remember the Mclaren F1 being available in any patch for the game at all...

i do but i dont have it sorry

On 26-Jul-2008 Kenny 2x4 said:

F1...
I don't remember the Mclaren F1 being available in any patch for the game at all...

its in the coca cola extender for xbox 360